Sanitary
HPL and phenolic toilet cubicles, supplied and installed in the Eastern Province
GYPTECH builds floor-standing toilet cubicles from compact melamine-faced board, moisture-resistant through its full thickness, braced by an anodized aluminium headrail and set on height-adjustable legs. We fabricate the panels in our Saudi workshop and install them with our own crews, priced from your BOQ or drawings.
- Saudi Aramco registered vendor — vendor code 10064288
- Supply and install, one contract
- Local stock in Al Khobar
Project details
The more detail you give us, the sharper the price.
Request received
Thank you. A GYPTECH engineer will review your scope and come back to you.
Specification
Toilet cubicles
- Construction
- Floor-standing cubicles: doors, pilasters and partitions braced by a continuous aluminium headrail
- Panels
- Compact melamine-faced board, faced both sides, chamfered edges; moisture-resistant through the full thickness (Type MDF.H to EN 622-5)
- Panel thickness
- 13 mm and 19 mm; the thickness schedule is confirmed in writing for each project
- Cubicle size
- Recommended 1000 × 1800 × 2003 mm (W × D × H); range W 0.8–2.2 m · D 0.9–2.85 m · H 1.8–2.9 m
- Doors
- 610 mm inward swing as standard, 550–1000 mm range; accessible doors 900–1000 mm with a fourth hinge
- Floor clearance
- 150 mm standard, adjustable 50–150 mm
- Aluminium profiles
- Anodized aluminium 6063-T5: headrail 77 × 35 × 1 mm, U-channels 25 × 16.5 × 1.8 mm; powder coating on request
- Hardware
- Two lines, chosen per project: stainless steel (304; 316 on part of the range) or black nylon; three hinges per door, turn-lock occupancy indicator, coat hook, knob and rubber-lined door stop
- Mounting
- Pilasters on floor anchors with studs, levelling plate and locking nuts, on height-adjustable legs; U-channels at wall abutments and panel joints
- Decor
- Selected and confirmed per project from the range of the board confirmed for that project
- Accessories
- Urinal screens in the same board and structure
How we work
- 01Send your drawings or BOQ
- 02We return a system proposal with quantities
- 03Supply
- 04Installation by our own crews
- 05Snag list and sign-off
Sectors we supply
- Offices
- Education
- Healthcare
- Hospitality
- Mosques
- Industrial
Frequently asked questions
Phenolic or HPL compact laminate — what are your panels?
In the regional market both names are used for solid compact board cubicles. Our panels are compact melamine-faced board, moisture-resistant through the full thickness (Type MDF.H to EN 622-5) — the construction the market calls solid phenolic. If your specification calls for compact laminate to EN 438-4, tell us at enquiry stage and we confirm acceptance before ordering.
What does a priceable cubicle BOQ include?
The number of standard and accessible cubicles and any urinal screens, the cubicle sizes or a dimensioned layout, door width and swing, panel thickness, hardware line (stainless steel or black nylon), decor, floor clearance and the site location. A washroom plan is enough for us to prepare the quantities.
Do you supply only, or supply and install?
We supply and install under one contract: panels, aluminium profiles, hardware and fixings, installed under GYPTECH site supervision. Finished walls and floor, sanitaryware and plumbing, and ventilation are by others.
What drawings do you need to price?
A washroom layout plan with room dimensions, or your BOQ. Door swings, accessible cubicles and wall positions help us set out the run; we then prepare shop drawings for approval before fabrication.
Which hardware should I choose for a coastal or humid washroom?
Two hardware lines are offered: stainless steel (304, with 316 on part of the range, item by item) and black nylon. The line and grade are chosen per project; for coastal and high-humidity rooms we agree them with you in the project hardware schedule.
Ready to price your project?
Send your drawings or BOQ and we'll return a system proposal with quantities.